Dhcp - TP-Link TL-R4199G User Manual

WAN Index - This shows the Router's WAN ports.
Port Status - This shows the ports' current status: Enabled or Disabled, the default status is
Enabled.
Flow Control - This displays whether the Flow Control is Enabled, "Enabled" means the
function is enabled, and "Disabled" means the function isn't enabled.
Negotiation Mode - The options are: Auto Negotiation, 10M Half Duplex, 10M Full Duplex,
100M Half Duplex, 100M Full Duplex.
Ingress Limit Mode & Ingress Limit Speed - Select the limit mode and limit speed for the
WAN ports.
Egress Limit & Egress Limit speed - Enable Egress Limit for WAN ports and select the limit
speed for them.
Note:
Egress speed limit is designed for controlling the broadcasting storm. When the current flux
oversteps the setting value, the overstepped datagrams will be discarded.

4.4 DHCP

Choose menu "DHCP", you can see the submenus under the main menu: DHCP Settings, DHCP
Clients List and Address Reservation.
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
TL-R4199G SMB Broadband Router User Guide
Figure 4-13
Figure 4-14
27