TP-Link TL-R4199G User Manual page 13

Smb broadband router

Table of Contents

TL-R4199G

SMB Broadband Router User Guide

Step 4: Configure the IP address as shown in Figure 3-4. After that, click OK.

Figure 3-4

Note:

You can

configure the PC to get an IP address manually, select "Obtain an IP address

automatically" and "Obtain DNS server address automatically" in the screen above. For Windows

98 OS or earlier, the PC and router may need to be restarted.

Now, you can run the Ping command in the command prompt to verify the network connection.

Please click the Start menu on your desktop, select run tab, type cmd in the field, and then type

ping 192.168.1.1 on the next screen, and then press Enter.

If the result displayed is similar to the screen below, the connection between your PC and the

Router has been established.

Table of Contents