3.5 Electrical connection
3.5.1 Connection to the grid (AC output)
1
wire and earth wire is less than 10ohm.
Connect the inverter to the grid:
1) Scrip off PE/N/L1/L2/L3 cables as figure below:
No.
A
B
C
D
2) Crimp pin contact by using a crimping pliers.
3) Separate the AC connector.
4) Pass the crimped AC wire into the AC connector.
Description
Protective layer diameter
Length of stripped off
Length of insulate layer
Cross section of ac cables
Figure 3-6
11
Telephone : +44 (0) 1245 428500
Email : sales@rayleigh.com
Remark
15-25mm
16mm
50mm
6-15mm²