Subscribe to Our Youtube Channel
Related Manuals for Moosoo TC1 Series
Summary of Contents for Moosoo TC1 Series
- Page 1 User Manual TC1 Series TC1 Mate/TC1 Pro Cordless Vacuum... Brandsus@outlook.com Mon. - Fri. 9am - 6pm (CST) Contact us We are here to help! Brandsus@outlook.com...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS WHAT'S IN THE BOX OVERVIEW ASSEMBLY TABLE OF SPECIFICATION CONTENTS OPERATING INSTRUCTIONS CLEANING AND MAINTENANCE CLEANING A CLOG TROUBLESHOOTING WARRANTY...
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 11. Do not use the vacuum without the dust cup lid in place. When using an basic precautions should always be followed, including the following: 12. Do not put any objects into openings of the vacuum. Do not use when any READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE) openings are blocked. -
Page 4: What's In The Box
WHAT'S IN THE BOX OVERVIEW CAUTION: Assemble the vacuum according to the "Assembly" section. 2-in-1 CreviceTool Electric Sofa Brush Battery Pack Button Battery Pack Charging Wall Mount Power Switch Extend Tube Electric Floor Brush Vacuum Main Body Dust Cup Suction Level Switch Filter Case Air Outlet Dust Cup Lid Lock Vacuum Main Body Button Dust Cup Release Button Tube Release Button 2-in-1 CreviceTool Charging Wall Mount Adapter Extend Tube... -
Page 5: Specifications
ASSEMBLY SPECIFICATIONS Vacuum Cleaner Name Model TC1 Series Adapter Input Voltage 100V~240V 50/60Hz 31V 0.5A Adapter Output Voltage Disposal： The chemical substances contained in the built-in lithium-ion battery of this product will pollute the environment. Before scrapping the product, the battery must be removed and handed over to a professional waste battery recycling station for disposal. -
Page 6: Charging Instruction
OPERATING INSTRUCTIONS Charging Instruction (3) Connect the adapter jack to the charging port of the battery pack. CAUTION: It is important to fully charge your machine before using it for the first time and after every use. Charging Wall Mount Conecting the Adapter with Wall Mount To charge the machine, place... - Page 7 OPERATING INSTRUCTIONS Crevice Tool Instruction Indicator Light Instruction With brush: Press the button to move Without brush: Push the brush the brush back to the fixed position to forward to the fixed position to clean clean the dust. the particles from the crevices Low Battery Alarm (After turned on, the white light steadily (no flashing).
- Page 8 OPERATING INSTRUCTIONS Accessories Usage Guide Pet Grooming Brush: suitable for removing floating hair from pets. Floor Brush: suitable for carpets, floors, and other flat, horizontal surfaces. Sofa Brush: suitable for surface dust, pet hair, mites, etc., on soft surfaces, such as sofas or mattresses. Charging Wall Mount Instruction Using screws to connect the two sides to the main board.
-
Page 9: Cleaning And Maintenance
OPERATING INSTRUCTIONS CLEANING AND MAINTENANCE Plug the adapter into the wall socket and connect it to the charging port on CAUTION: the charging base. Always switch the vacuum OFF before attempting to empty the dust cup. Clean the Dust Cup Empty the dust cup when the dust inside has exceeded the MAX line. - Page 10 CLEANING AND MAINTENANCE CAUTION: Air dry at least 24 hours before reinstalling. If you find that the suction is weak or the “Suction Blockage Indicator" on the LED screen flashes, then please wash the filter. Cleaning the Filter Device Press the dust cup release button and remove the dust cup. Assemble the pre filter, filter sponge back.
- Page 11 CLEANING AND MAINTENANCE Clean the Sofa Brush CAUTION: When the "Brushroll Jam Indicator" " " on the LED screen flashes until the screen is Press and turn the buckle counter- Pull out the buckle, and then take off, while the LED light on the floor brush is off and the floor brush stops rotating, it means clockwise to the " " sign. out the brushroll. that the floor brush is blocked. Check the floor brush and clear the blockage. Clean the Floor Brush Press the release button and hold to pull out to detach the tube from the bloor brush.
-
Page 12: Troubleshooting
CLEANING A CLOG TROUBLESHOOTING Troubleshooting CAUTION: PROBLEM POSSIBLE REASONS SOLUTIONS Low suction or vacuum failure caused by overheating may be due to a clog in the vacuum. The used adapter is not the Charge the vacuum with the original adapter. Please check and clear clogs in the dust cup, mesh shell, pre-motor filter, post-motor filter, The vacuum original one... -
Page 13: Warranty
WARRANTY CUSTOMER CARE WARRANTY SERVICE The 1-year Limited Warranty is valid for Products. If you have a query about your Maircle appliance, please contact customer service at: Brandsus@outlook.com If your machine is used correctly according to the instruction manual and Please inform us of your model name/number, purchased date, order there is a quality failure during the warranty period, we will provide you number, machine malfunction details and your request for reparations.
Need help?
Do you have a question about the TC1 Series and is the answer not in the manual?
Questions and answers