1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Network Router
  5. TD-8840
  6. User manual

TP-Link TD-8840 User Manual

External adsl2+ router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TD-8840 User Guide
External ADSL2+ Router
Rev: 1.0.2
08
19100100

Advertisement

Table of Contents
loading

Related Manuals for TP-Link TD-8840

Summary of Contents for TP-Link TD-8840

  • Page 1 TD-8840 User Guide External ADSL2+ Router Rev: 1.0.2 19100100...
  • Page 2 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

  • Page 3: Fcc Statement

    FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 4: Safety Notices

    EC DECLARATION OF CONFORMITY (EUROPE) In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, this product meets the requirements of the following standards: • EN55022 • EN55024 • EN60950 SAFETY NOTICES Caution: Do not use this product near water, for example, in a wet basement or near a swimming pool.

  • Page 5: Package Contents

    Package Contents The following items should be found in your package: One TD-8840 External ADSL2+ Router One AC power Adapter for TD-8840 External ADSL2+ Router One Resource CD for TD-8840 External ADSL2+ Router, including: • This Guide • Other Helpful Information •...

  • Page 6: Table Of Contents

    Chapter 1. Introduction ... 1 Product Overview ... 1 Main Features ... 1 Supporting Protocol... 1 Transmit Data-rate ... 2 ATM Property ... 2 System Support... 2 Working Environment ... 2 Conventions ... 3 Chapter 2. Hardware Installation ... 4 System Requirement...

  • Page 7: Chapter 1. Introduction

    The TD-8840 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices, support Auto-MDIX. The TD-8840 not only uses html (web mode through Ethernet port) to configure the Router but also uses external utility software. You can download it from our website (http://www.tp-link.com).

  • Page 8: Transmit Data-Rate

    - ADSL dual latency (fast path and interleaved path) - I.432 ATM physical layer compliant - Supports RFC2364 (PPPoA) - Supports RFC2516 (PPPoE) - Supports RFC1483 (EoA) (Bridged *and Router) - Supports RFC1577 (IPoA) Note: “*” Needs the third-party software.

  • Page 9: Conventions

    Humidity: 10%~90% (non-condensing) 1.8 Conventions The Router or TD-8840, or device mentioned in this User guide stands for TD-8840 External ADSL2+ Router without any explanations. Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation.

  • Page 10: Chapter 2. Hardware Installation

    The TD-8840 maintains five separate interfaces, four Ethernet and one ADSL interface. The Router should not be located where it will be exposed to moisture or excessive heat. Place the Router in a location where it can be safely connected to the various devices as well as to a power source.

  • Page 11: Hardware Installation Procedures

    The procedure to install the Router can be described in general terms in the following steps: First Step: Connecting the MODEM port of Splitter with the TD-8840 ADSL2+ Router LINE port by telephone line. While you need to use a telephone, please attach telephone line into the phone of Splitter.

  • Page 12: Chapter 3. System Configuration

    Choose Properties -> Right-click Local Connection -> Choose Properties -> Double-click Internet Protocol (TCP/IP). The words in fact may be different with this guide. Remarks: you can check whether your configuration is successful through PING command. Enter Ping 192.168.1.1 TD-8840 External ADSL2+ Router User Guide Figure 3-1...

  • Page 13: Login

    If the screen looks like the following, the connection has failed. Please try again. 3.2 Login Startup Internet Explorer, and enter 192.168.1.1;then enter default user name(admin) 、 password(admin), When ADSL2+ connection is OK, you will see the Figure 3-2. TD-8840 External ADSL2+ Router User Guide Figure 3-2 Figure 3-3...
  • Page 14 You will then see the Figure 3-5, in which some information such as link rate and so on is displayed. Default value of user name and password is “admin”; if you want to change them, please go to “Management” “Access control” “Passwords” changing them. (Figure 3-6) TD-8840 External ADSL2+ Router User Guide Figure 3-5 Figure 3-6...

  • Page 15: Web Setup

    There are 7 PVC links in the WAN setup page, choose the appropriate PVC according to your need, and then click the edit button, you will enter the page of ATM PVC Configuration (See Figure 3-8) TD-8840 External ADSL2+ Router User Guide Figure 3-7...
  • Page 16 TD-8840 External ADSL2+ Router User Guide Enter VPI/VCI value and service category which is provided by your ISP, click next to enter the next step. You will see the Figure 3-9. Note: The type of network protocol selected may be different in different areas, there are five types （Figure 3-9）, So you should ask your ISP to acquire the local type of network protocol and...
  • Page 17 TD-8840 External ADSL2+ Router User Guide Figure 3-10 You will see the Figure 3-11, then turn on the selected functions according to your demands. Clicking the next button to enter the next step, you will see the Figure 3-12, finally click save to complete the configuration.
  • Page 18 ISP, after selecting the other function (often using the default setup), click the next button. You will see the Figure 3-14, then turn on the selected functions according to your needs. Clicking TD-8840 External ADSL2+ Router User Guide Figure 3-12...
  • Page 19 Figure 3-15, finally click save to complete the configuration. MAC Encapsulation Routing (MER) TD-8840 External ADSL2+ Router User Guide Figure 3-14 Figure 3-15...
  • Page 20 You will see the Figure 3-17, then turn on the selected functions according to your needs. Clicking the next button to enter the next step, you will see the Figure 3-18, finally click save to complete the configuration. TD-8840 External ADSL2+ Router User Guide Figure 3-16...
  • Page 21 You will see the page (Figure 3-20), then turn on the selected functions according to your needs. Clicking the next button to enter the next step, you will see the Figure 3-21, finally click save to TD-8840 External ADSL2+ Router User Guide...
  • Page 22 If you select the Bridging protocol, you just open the bridge service function options, you will see the Figure 3-22, then click the next button, you will see the Figure 3-23, finally click save to complete the configuration. TD-8840 External ADSL2+ Router User Guide Figure 3-20...
  • Page 23 Note: After you complete any setup, the new setup must be saved and the Router must be restarted for the configuration to go into effect. Please click the Save/Reboot button to restart, referring to the Figure 3-24. TD-8840 External ADSL2+ Router User Guide...

  • Page 24: Software Dial

    All of the above setup is under windows XP OS. 3.4 Software Dial If TD-8840 CPE work in bridged (RFC 1483 Bridged) mode when it connecting Internet. You must install dial software on your PC. There are some software working on WINDOWS in market, example for EnterNet3000、RASPPPoE、WinPeET.
  • Page 25 TD-8840 External ADSL2+ Router User Guide connection to your desktop. When you assess the internet by ADSL, double-click this shortcut of dial connection in your desktop, enter the account name and password, then click connect to connect the internet.

  • Page 26: Chapter 4. Advantage Management Setup

    Modify the default IP address of the port of LAN(192.168.1.1) Modify the login password Configure DHCP Check the information of IP and the operation status Configure the NAT function Configure the DNS parameters Configure Security rule Configure DSL parameter TD-8840 External ADSL2+ Router User Guide...

  • Page 27: Appendix A: Faq

    Have complete all configurations, but can’t dial through computer Check the indicator of ADSL, it should be working in normally. Check the accuracy of parameter of value of VPI/VCI, Encapsulation mode of AAL5 and TD-8840 External ADSL2+ Router User Guide...
  • Page 28 PPPoA or PPPoE, ADSL Modem will connect automatically. You can check whether your ADSL Modem succeeds in connection with PING command. TD-8840 External ADSL2+ Router User Guide so you will not need to use the dial...

  • Page 29: Appendix B: Default Config

    TD-8840 External ADSL2+ Router User Guide Appendix B: Default Config User name admin Password admin 192.168.1.1 IP Address...

Table of Contents