Chapter 3. System Configuration; Computer Configuration - TP-Link TD-8810 User Manual

Chapter 3. System Configuration

3.1 Computer Configuration

1. Connect the cable according to Chapter 2, turn on the power.
2. Change the IP address of your PC（Figure 3-1）: Open TCP/IP Properties of the LAN card in
your PC, enter the IP address as 192.168.1.*.
Note:
(* is any value between 2 to 254, Net mask is 255.255.255.0, Gateway is 192.168.1.1, DNS
address is the value provided by ISP).
Note:
Users of Windows 98 can open TCP/IP Properties according to the following: Right-click (Mouse)
Network Neighbor -> Choose Properties -> Double-click TCP/IP.
Users of Windows 2000/NT/XP can do the following: Right-click Network Neighbor -> Choose
Properties -> Right-click Local Connection -> Choose Properties -> Double-click Internet
Protocol (TCP/IP).
TD-8810 External ADSL2+ Router User Guide
Figure 3-1
6