Fujitsu CELSIUS W5012 Operating Manual page 23

► Plug the data cable into a suitable monitor port of the device (VGA, DVI-D, Displayport, HDMI).
On devices with monitor socket:
The monitor power cable may only be connected to the monitor socket of the device
if the monitor current consumption is less than 1.0 A at 230 V or 2.0 A at 100
V. The values for the monitor current consumption can be found in the technical
data on the monitor or in the operating manual for the monitor.
► Depending on your device configuration level, plug the monitor power cable into either
the monitor socket of the device (1) or a grounded power outlet (2).
When you connect the monitor to the monitor socket of the device, it automatically
switches off as soon as the device switches off.
Fujitsu
1
Getting started
2
19