Table of Contents
Advertisement
en operation
The Eco 50° programme is an es-
pecially environmentally friendly
programme and ideal for normally
soiled tableware. It is the most effi-
cient programme for the combina-
tion of energy/water consumption
for this type of tableware and evid-
ences conformity with the Eco-
design Directive.
If you do not perform any actions
on the appliance for 10 minutes, it
will switch off automatically.
14.2 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
Press the right programme button.
▶
a The programme is set and the pro-
gramme button flashes.
a The remaining running time of the
programme appears on the dis-
play.
14.3 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
Press the button for the relevant
▶
additional function.
→ "Additional functions", Page 20
a The additional function is set and
the additional function button
flashes.
1
Depending on the appliance specifications
32
14.4 Setting timer program-
You can delay the start of the pro-
gramme by up to 24 hours.
Press
1.
a "h:01" appears in the display.
Use
2.
time for the programme.
Press
3.
1
a This activates timer programming.
Tip: To deactivate timer program-
ming, press
appears in the display.
14.5 Starting the programme
Press
▶
a The programme has ended when
the display shows "0h:00m".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 33
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
ming
.
to set the required start
.
repeatedly until "h:00"
.
Advertisement
Table of Contents
