Table of Contents
Advertisement
Appliance door
en
Clean the panels with glass cleaner and a soft cloth.
Wipe the condensate trough with a cloth and some hot
soapy water.
:
Warning
Risk of injury!
Scratched glass in the appliance door may develop
■
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
The hinges on the appliance door move when
Risk of injury!
■
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting panels
Open the appliance door fully and refit the
1.
condensate trough. To do this, insert the trough from
above and rotate it at the bottom (fig.
Slide the intermediate glass panel back in and make
2.
sure that it is sitting correctly at the bottom in the
retainer (fig.
).
"
Press down on the top of the intermediate glass
3.
panel (fig.
).
#
24
4.
5.
).
!
6.
7.
8.
9.
10.
Caution!
Do not use the cooking compartment again until the
panels have been correctly fitted.
Refit the seal on the left and right (fig.
Push in the inner glass panel.
Before sliding the panel in, make sure that the
glossy side of the panel is on the outside and the
cut-outs on the left and right are at the top.
The panel must be sitting correctly at the bottom in
the retainer (fig.
).
%
Push the inner panel in at the top (fig.
Put the cover back in place and press on it until you
hear it click into place (fig.
Open the appliance door again fully.
Close the two locking levers on the left and right
(fig.
)
(
Close the appliance door.
)
$
).
&
).
'
Advertisement
Table of Contents
