Advertisement
Quick Links
Advertisement
Related Manuals for NODEXON NX-5610-48G
Summary of Contents for NODEXON NX-5610-48G
- Page 1 NX-5610-48G Core Aggregation Switch Product Guide...
- Page 2 Statement of Copyright Nodexon Networks©2021 All copyrights in this document are reserved by Nodexon Networks. Without Nodexon Networks' prior written approval, any reproduction, excerption, backup, modification, transmission, translation, or commercial use of this document or any portion of this document, in any form or by any means, is forbidden.
- Page 3 Preface Thank you for using our products. This manual will guide you through the installation of the device. This manual describes the functional and physical features and provides the device installation steps, hardware troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.
- Page 4 Introduction To The Installation Manual The Product User's Manual mainly introduces the software and hardware parameters, installation methods, and precautions during the installation process of the NX-5610-48G switch. This manual includes the following sections: Chapter 1: Product introduction. Briefly describe the basic functions and features of the switch, detailed hardware and software specifications, and appearance information.
-
Page 5: Chapter 1 Product Introduction
Chapter 1 Product Introduction 1.1 Product Introduction The NX-5610-48G adopts a new generation of high-performance hardware and software platform to provide flexible and cost-effective full Gigabit access and uplink ports. It supports Layer 3 routing protocols, complete security protection mechanisms, and complete ACL/QoS policies and enrichment. - Page 6 Mac address: 16K Surge ±6KV proof Contact：±6KV Non-contact：±8KV Power 100-240V/50-60Hz Dimen sion 440mm×365mm×44mm （L×W ×H） Software Features Support hardware watchdog, restore factory Settings, system and port LED Support global information, statistics, log information Basic AI Support user management, alarm management, configuration management Functions Support port rate, duplex, flow control, maximum frame length configuration...
- Page 7 IEEE 802.1x: Access control and authentication G.8032: ERPS Ethernet loop protection switch Support Layer 3 interface Support IPv4 、 IPv6 Address configuration Layer 3 interface Support ARP configuration Support ND configuration Supports RIP V1/V2, OSPFv1\OSPFv2 dynamic routing Router Support static routing Support DHCP server DHCP Support DHCP relay...
- Page 8 Support STP(IEEE 802.1d)，RSTP(IEEE 802.1w)and MSTP(IEEE 802.1s) protocol Spanning tree Support loop protection, root bridge protection, TC protection, BPDU protection, BPDU filtering Support IGMP v1/v2 Snooping Support fast leave Multicast Support multicast VLAN Supports multicast filtering, packet statistics, and unknown multicast discards.
- Page 9 Indicator light The working information of the NX-5610-48GPindicator is as shown in the following table. Indicator Indicator normal Abnormal and trouble shooting light light status instruction Power If the light does not illuminate, check if the Indicator Indicator Yellow power supply of the external power outlet is light light light...
-
Page 10: Chapter 2 Hardware Connection
Connect the switch and the RJ45 port of the peer network device with a network cable. 2.2 Connecting SFP Ports The SFP port of the NX-5610-48G supports only 10 Gigabit fiber modules. It is recommended to use standard SFP module products. -
Page 11: Device Initialization
Check that the power supply of the power outlet meets the switch specifications. Check that the power supply, switch, and rack are properly grounded. Check whether the switch is connected to other network devices. 2.4 device initialization The switch will automatically initialize after the power is turned on and the power switch is turned The indicator light will appear as follows: 1、After the power is turned on, the power indicator remains steady. - Page 12 In order to ensure long-term stable operation of the switch and prolong its service life, please maintain a certain temperature and humidity in the environment. Too high or too low ambient humidity is likely to cause leakage, deformation and even corrosion of metal parts. If the temperature is too high, the aging process of the insulation material will be accelerated, which will seriously affect the service life of the equipment.
- Page 13 1、The power supply system takes necessary measures against grid interference; 2、The switch should be away from high-frequency, high-power, high-current equipment, such as wireless transmitters; 3、Take electromagnetic shielding measures when necessary. Lightning Protection Needs When a lightning strike occurs, a strong current is generated in an instant, and the air in the discharge path is instantaneously heated to 20,000 degrees Celsius, and an instantaneous large current is enough to cause fatal damage to the electronic device.
- Page 14 Install the two L-shaped brackets in the accessories on both sides of the switch panel and fix them with the screws provided in the accessories. Place the switch in the proper position in the rack and support it by the bracket. Fix the L- bracket to the guide groove fixed at both ends of the rack with screws to ensure that the switch is installed on the rack stably and horizontally.
- Page 15 Step3 Turn on the browser, input 192.168.254.1, and click Enter Step4 Enter the web manage UI, Input the Username and PW, both are admin and log in Step5 You already entered the web management UI of the switch and can start to configure the switch Chapter 4, packing list and recommendations for use 4.1Open the package and check the list below.
- Page 16 Hook 2 pcs To installation Warranty 1 pc To After sale service Card Manual 1 pc To guide the user 4.2 Suggestions 1. For safety reasons, non-professionals should not open the product case ； 2. Pay attention to the danger of strong electricity and safe protection when the product is powered on；...