Advertisement
Quick Links
Advertisement
Related Manuals for NODEXON NX-5610-24G4F
Summary of Contents for NODEXON NX-5610-24G4F
- Page 1 NX-5610-24G4F Core Aggregation Switch Product Guide...
- Page 2 Statement of Copyright Nodexon Networks©2021 All copyrights in this document are reserved by Nodexon Networks. Without Nodexon Networks' prior written approval, any reproduction, excerption, backup, modification, transmission, translation, or commercial use of this document or any portion of this document, in any form or by any means, is forbidden.
- Page 3 It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it is assumed that the users are already familiar with the related terms and concepts. Obtaining Technical Assistance Website:https://www.nodexon.com/ Technical Support Website:https://nodexon.com/support Community:http://www.nodexon.com/community Technical Support Email:support@nodexon.com Case Portal :https://www.nodexon.com/caseportal Website:https://www.nodexon.com/...
- Page 4 "Product Use Guide" Introduces NX-5610-24G4F switch software and hardware parameters, installation methods and matters need attention during the installation process matters. This manual includes the following sections: Chapter 1 : Product introduction. Briefly describe the basic functions and features of the switch, detailed hardware and software specifications, and appearance information.
-
Page 5: Chapter 1 Product Introduction
Chapter 1 Product Introduction 1.1 Product Brief Introduction The NX-5610-24G4F uses a new generation of high-performance hardware and software platforms to provide flexible, cost-effective full Gigabit access and uplink ports, support for Layer 3 routing protocols, complete security protection mechanisms, and comprehensive ACL/QoS policies. - Page 6 24 10/100/1000Mbps RJ45 ports 4 10G SFP+ fiber ports 4 1000Mbps RJ45 port(Combo) port 1 RJ45 Console port, 1 1000M RJ45 management port 1 USB 2.0, 1 Mini-usb Console port Forward mode: store and forward Backplane bandwidth: 128 Gbps performance Packet forwarding rate: 95.2 Mpps Support 16 K MAC address table depth Lightning...
- Page 7 440mm × 320 mm × 44mm Dimensions (L × W × H) Software features Support RIP V1/V2 , OSPFv1/OSPFv2 dynamic routing routing Support static routing Support DHCP server DHCP Support DHCP relay Support DHCP Snooping Support 4K VLANs VLAN Support 802.1Q VLAN, MAC VLAN, IP VLAN Voice VLAN MAC address...
- Page 8 Support static, dynamic, filtering address table Password protection Support user access based on port number, IP address, and MAC address Support HTTPS, SSL V3, TLS V1, SSH V1/V2 Support IP-MAC-PORT ternary binding Safety Support ARP protection, IP source features protection, DoS protection Support DHCP Snooping and DHCP attack protection Support 802.1X authentication, AAA...
- Page 9 Support CPU protection Access control Support L2 (Layer 2) ~ L4 (Layer 4) (ACL) packet filtering Support port mirroring, port redirection, flow rate limiting, QoS re- marking Support 8 port queues Support port priority, 802.1P priority, DSCP priority Quality of Support SP, WRR, W FQ priority scheduling algorithm Service (QoS) Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w) and MSTP (IEEE 802.1s)
- Page 10 Multicast Support IGMP v1/v2 Snooping Support fast leave mechanism Support for multicast VLAN Supports multicast filtering, packet statistics, and unknown multicast discards. Support for multicast suppression Storm Support broadcast suppression suppression Support for unknown unicast suppression Support static aggregation Support dynamic aggregation Link Support IP, MAC, hybrid load balancing mode aggregation...
- Page 11 Support IPv6 Ping, IPv6 Tracert, IPv6 Telnet IPv6 Support IPv6 SSH, IPv6 SSL Support WEB network management (HTTP, HTTPS, SSL V3) Support CLI (Telnet, SSH V1/V2, local serial port) Management Support for SNMP V1/V2/V3 maintenance Support LLDP, RMON Support ARP protection, IP source protection, DoS protection Support CPU monitoring, memory monitoring Support Apollo cloud platform one-stop management and maintenance Support system log, grading warning...
- Page 12 Support Ping, Tracert detection, cable detection 1. 4 product appearance Front panel Contains indicator light, RJ45 port, SFP port, CONSOLE port Indicator The NX-5610-24G4F indicator works as shown in the following table. Working Indicator Name Colour Description Light Status Constantly...
- Page 13 The NX-5610-24G4F supports 24 10/100/1000Mbps adaptive RJ45 ports, 4 Combo 10/100/1000 Mbps RJ45 ports, 1 RJ45 Console port, and 1 Gigabit RJ45 management port. SFP port NX-5610-24G4F provides four 10 Gigabit SFP port optical module expansion slots for plugging in Gigabit SFP modules. RST button When the switch is powered on, press the button with the needle and release the device to enter the restart state.
-
Page 14: Chapter 2 Hardware Connection
Rear panel Includes: power outlet, power switch, ground terminal Outlet Connect the power cable to the switch NX-5610-24G4F. The power supply needs to be 100-240V~ 50/60Hz AC power. Ground Terminal Use a wire ground to prevent lightning strikes. To avoid product lightning strikes and extend... - Page 15 2.2 SFP ports connection The SFP port of thNX-5610-24G4F only supports 10 Gigabit fiber modules. Pls use standard SFP module products. The process of installing a fiber module on a switch is as follows: 1. Grasp the fiber module from the side and insert it smoothly along the SFP port slot of the switch until the fiber module is in close contact with the switch 2.
-
Page 16: Chapter 3 Product Installation
1. After the power is turned on, the power indicator remains steady. When SYS enters the flashing state, the system runs normally. 2. The indicator of each port indicates the connection status of each port, indicating that the switch has started to work normally. Chapter 3 Product installation 3.1 Installation Precautions Note: To avoid damage to the equipment and personal injury caused by improper use,... - Page 17 Relative humidity Environmental Temperature description 0°C~40°C 10% to 90% RH does not condense Working Environment Storage -40 ° C ~ 5% to 90% RH does not condense Environment 70 ° C Elevation Products with this mark are only suitable for safe use in areas below 2000m above sea level. Dustproof Dust falling on the surface of the switch can cause electrostatic adsorption and poor contact of the metal contacts.
- Page 18 3.2 product installation 19 inch standard rack mount The NX-5610-24G4F is designed to fit a 19 -inch standard rack and can be easily mounted to a rack. The specific installation steps are as follows: 1、 Check the grounding and stability of the rack;...
- Page 19 3、 the switch is placed in position within the frame, is supported by the carriage; screw the L -shaped bracket fixed to the fixed rack guide slot ends, the switch to ensure a stable, horizontally mounted on the machine frame, Note: Good grounding of the rack is an important guarantee for anti-static, anti-leakage, lightning protection and anti-interference of the equipment.
- Page 20 Step1 Connect the network cable connected to the computer to the RJ45 port of the switch when the device is working normally. Step2 Manually change the computer IP address to 192.168.254.X (X is within 2~254), and the subnet mask is 255.255.255.0. Step3 Open the browser of the computer, enter 192.168.254.1 in the address box, and hit the Enter key.
-
Page 21: Chapter 4, Packing List And Recommendations For Use
Step5 You have entered the web management interface of the switch and can start to configure the switch. Chapter 4, packing list and recommendations for use 4.1 Open the package and check the following list carefully. article Description Quantity switch power cable Switch power supply Hanging ear... - Page 22 For after-sales maintenance Warranty Card Product Used to guide users to install switches manual 4.2 Suggestions for use For safety reasons, non-professionals should not open the product casing; Pay attention to the danger of strong electricity and safe protection when the product is powered on;...