Texas Instruments TI-80 Manual Book page 137

Deleting a List
Editing a List
Element
You can delete the contents of a list in several ways:
¦
With the CLRLIST
¦
Through the
MEMORY
¦
list editor, by pressing 7 to move onto the list
In the STAT
name and then pressing M ¸.
¦
In the list editor, by deleting each element.
STAT
¦
On a command line, by entering
To edit a list element:
1. Display the STAT
2. Move the rectangular cursor to the element you want to
change.
3. Press ¸ to switch to the editing context. Then:
¦
Change the current value by inserting, deleting, or
typing over digits.
¦
Press an entry key, such as a number or letter, to begin
an entry. This automatically clears the value.
¦
Press M to clear the entire value and then enter a
new value.
Note: If you clear a value by mistake, you can
immediately press ¸ to restore the value at the
rectangular cursor.
4. Press ¸ to store the new value and move to another
element.
Note: You may enter an expression, which is evaluated when
you press ¸, 8, or 7.
instruction (page 9-13).
menu (Chapter 12).
0!DIM
list editor.
listname.
Statistics 9-11