Displaying The Table - Texas Instruments TI-80 Manual Book

Displaying the Table

The table displays up to six values for the independent variable, along with the
six corresponding values of one dependent variable, at a time. Once the table is
displayed, you can press 6, 7, 9, and 8 to move around and scroll the table,
displaying other independent and dependent values.
The Table
Displaying More
Independent
Values
Press 2
& to display the table screen.
FUNC Mode
The top line displays the name of the independent variable (
for FUNC mode; T
variable ( Y n for FUNC
The bottom line displays the full value of the current cell,
which is indicated by the rectangular cursor. The center
portion is used to display the values of the variables,
abbreviated to six digits if necessary.
Press 7 and 8 to display additional values for the
independent variable and the values for one corresponding
dependent variable.
Note: You can scroll "back" from the value entered for
. As you scroll,
TBLMIN
the value shown on the top line of the table. In the example
below, ,
TBLMIN=0
displays values of
backward and display the table for
PARAM
for PARAM mode) and one dependent
mode; X n T or
is updated automatically to
TBLMIN
@TBL=1 , and
Y1=Xñ+2
=0, . . ., 5. You can press 7 to scroll
X
X
Mode
Y n T for PARAM mode).
generates and
=1, . . . ,4.
Tables 6-5
X