Related Manuals for Milwaukee M18 FUEL CAG125XPD
Summary of Contents for Milwaukee M18 FUEL CAG125XPD
- Page 1 OPERATOR'S MANUAL Cat. No. M18™ FUEL™ 5" GRINDER To reduce The risk of injury, user musT read and undersTand operaTor's manual.
-
Page 2: Work Area Safety
general poWer Tool safeTy Warnings Warning read all safeTy Warnings and all insTrucTions. Failure to follow the warnings and instructions may result in electric shock, fire and/or save all warnings and instructions for future reference. serious injury. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. result in personal injury. Work area safeTy • D o not overreach. Keep proper footing and • K eep work area clean and well lit. -
Page 3: Specific Safety Rules
coins, keys, nails, screws, or other small metal tection must be capable of stopping flying debris objects that can make a connection from one generated by various operations. The dust mask terminal to another. Shorting the battery terminals or respirator must be capable of filtrating particles together may cause burns or a fire. generated by your operation. Prolonged exposure • U nder abusive conditions, liquid may be eject- to high intensity noise may cause hearing loss. - Page 4 Maintain labels and nameplates. These carry breakage. Flanges for cut-off wheels may be dif- important information. If unreadable or missing, ferent from grinding wheel flanges. contact an authorised MILWAUKEE dealer ® • Do not use worn down wheels from larger or service centre for a replacement.
-
Page 5: Specifications
Installing Side Handle SPECIFICATIONS The side handle may be installed on either side of the gear case. Position the side handle in the Spindle location which offers best control and guard protec- Cat. Volts No load Thread Wheel Switch tion. To install, thread side handle into side handle Size Size Type... -
Page 6: Operation
7. Press in the spindle lock button while turning the flange nut clockwise. Tighten securely using a Warning Only use accessories with spanner wrench. Maximum Safe Operating Speed rated at least 8. To remove wheel, remove the battery pack and equal to the maximum speed marked on the reverse the procedure. power tool. This speed is based on the strength of the wheel, allowing for a reasonable mea- operaTion sure of safety. It is not meant to imply a best or most efficient operating speed. Do not exceed the Maximum Safe Operating Speed. Warning Always remove battery Installing/Removing Accessories... - Page 7 When using a cut-off wheel, hold the tool as shown, using only the edge of the wheel. Fig. 6 For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalogue or go ® online to www.milwaukeetools.com.au or www.milwuakeetools.co.nz Fig.
- Page 8 Test wheel for balance and loose or damaged wires Installing Backing Pad and Sanding Discs by letting it spin for one minute before applying it 1. Remove the battery pack. to the workpiece. During this time, no one should 2. Wipe the accessories, disc nut and spindle to stand in front of or in line with it.
-
Page 9: Accessories Warning
Flat areas may appear at properly, return the tool, charger and battery the end of the stroke when pressure is too heavy. pack, to your MILWAUKEE dealer or service ® Ease up on pressure at end of each stroke and centre. - Page 12 SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...