Yamaha 5PW1-SE2 Service Manual page 13

M To turn signal light.
N In this range, route the right han-
dle bar switch lead behind the
throttle cable.
O Pass the water temperature sen-
sor lead between the engine and
the radiator hose. Make sure to
push it into the deeper position
so that it is not caught between
the cylinder head cover and the
radiator hose.
P Route the clutch cable through
the inside of radiator hose and
fasten it with the clamp to the ra-
diator.
CABLE ROUTING
Q Fasten the clutch cable and cool-
ant reservoir tank breather hose
with the clamp.
–8–
SPEC