Pc Connection; Plug In The Tv; Put Batteries In The Remote; Turn On The Tv - TCL L32HDF11TA User Manual

PC Connection

To connect a personal computer and use your TV as a monitor, follow these steps:
1. Connect one end of a 15-pin monitor cable (VGA cable) to the PC IN VGA jack on the TV and the
other end to the PC's video output jack.
2. Connect an audio cable to the PC AUDIO IN jack on the back of the TV and the other end to the
audio output jack on the PC.
3. Turn on your TV; then turn on the PC.
4. Press the INPUT button on the remote control to open the Input list. Once open, press the INPUT
button repeatedly to select PC.
Rear of this unit

Plug in the TV

Plug the end of the power cord on the back of the TV into an outlet,
inserting the plug completely. Do not plug the TV into an outlet
controlled by a light switch.

Put Batteries in the Remote

• Remove the battery compartment cover from the back of the remote control by pushing the tab and
lifting off the cover.
• Insert 2 AAA batteries, making sure the polarities (+ and -) are aligned correctly.
• Replace the cover.

Turn on the TV

Turn on your TV by pressing the

Using the Remote Control to Complete the Initial Setup

You will need to use the remote control to complete the setup of your TV. The remote control allows
you to navigate through and select items that appear in the on-screen menus. The process works the
same on all menu screens: highlight your choice and select it.
To highlight an item in the menu list, press the up or down arrow (
left or right arrows (
menu.
Note: Highlighted items stand out from other menu items on the list (appear darker, brighter, or a
different color).
To PC VIDEO
IN (VGA)
VGA cable
Audio cable
DVI/PC AUDIO IN
button on the side of the TV or the
) to view other selections for the highlighted menu choice or to display a sub-
VGA
) to move up or down. Use the
14
button on the remote control.