Turning On/Off Subtitles; Enabling Subtitle Languages On Digital Tv Channels; Selecting A Subtitle Type On Digital Tv Channels; Using Teletext - TCL 65S421 Manual

Turning on/off subtitles

1. Press on the remote control, select Channel >
Subtitle and press OK/► to enter.
2. Select the Subtitle option, press OK/► to enter,
press ▲/▼ to select On or Off and press OK to
confirm.
3. Press EXIT or to close the menu.
Enabling subtitle languages on digital TV
channels
1. Press on the remote control, select Channel >
Subtitle > Digital subtitle language 1st and
press OK/► to enter.
2. Press ▲/▼ to select a subtitle language as your
preferred language and press OK to confirm.
3. Press ▲/▼ to select Digital subtitle language
2nd and press OK/► to enter.
4. Press ▲/▼ to select a secondary subtitle language
and press OK to confirm.
5. Press EXIT or to close the menu.
Shortcut operation: Press SUBT. on the remote
control to directly select a subtitle language available
for the selected digital TV programme.
Selecting a subtitle type on digital TV
channels
1. Press on the remote control, select Channel >
Subtitle > Subtitle type and press OK/► to enter.
2. Press ▲/▼ to select a subtitle type and press OK
to confirm. You can select Hearing impaired to
display the hearing impaired subtitles with your
selected language.
3. Press EXIT or to close the menu.

Using Teletext

Turning on/off Teletext

1. Press TEXT on the remote control to turn Teletext
on.
2. Press TEXT on the remote control again to turn on
Teletext PAT mode.
3. Press TEXT on the remote control again to turn
Teletext off.

Selecting decoding page language

1. Press on the remote control, select Channel >
Teletext > Decoding page language and press
OK/► to enter.
2. Press ▲/▼ to select a proper type of language
in which Teletext will display and press OK to
confirm.
3. Press EXIT or to close the menu.

Digital Teletext language

On digital TV channels, depending on the
broadcaster, you may be able to enjoy a service with
multiple initial Teletext pages in different languages.
This function allows you to select an available
language as primary language, which relates to
different initial Teletext pages.
1. Press on the remote control, select Channel >
Teletext > Digital teletext language and press
OK/► to enter.
2. Press ▲/▼ to select a language and press OK to
confirm.
3. Press EXIT or

Network connection

You can set up your TV so that it can access the
Internet through your local area network (LAN) using
a wired or wireless connection.

Connecting to a wireless network

Your TV is equipped to be connected to your home
network wirelessly. To do that you need a wireless
router or modem.
1. Press on the remote control, select Network >
Wireless connection > Wireless connection and
press OK/► to enter.
2. Press ▲/▼ to select On and press OK to confirm.
3. You can set the wireless network connection in 3
ways:
- a) Scan
When Wireless connection is turned on, the TV
will search all access points within range. Access
points found by the TV will be displayed. Press
▲/▼ to select an available access point, then
press OK/► to connect. Select All wireless (if
available) to find more access points.
Note: If you select a protected access point,
you will have to enter the corresponding
password.
- b) Manual
Press ▲/▼ to select Manual and press OK/► to
enter. You will be prompted to enter the correct
SSID of an available wireless router, select its
security type and enter the password (if needed)
to set up the connection.
- c) Auto
If your AP (Access Point) supports WPS (Wi-
Fi Protected Setup), you can connect to the
network via PIN (Personal Identification Number)
or PBC (Push Button Configuration). WPS will
automatically configure the SSID and WPA key
in either mode.
EN 13
Using more of your TV
to close the menu.