Advertisement
4
ATTACH THE BACK RAIL TO THE OUTER DRUMS
Locate the bag of bolts, washers and nuts without
n
the sprocket
Insert bolts into the opening channels on both sides
n
of the back rail (images E and F)
• The bolt head should face out of the channel
• Place the washer on the bolt and loosely tighten the nut
Repeat on the other side (try to insert both sides
n
of the rail simultaneously so it is even)
Once the rail is in place, tighten using the
n
Assembly without back rail.
Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions - V0823
⁄
" wrench
7
16
Assembly with back rail. Images show drums without heads,
hoops and tension rods.
4
E
F
Advertisement
