Advertisement
3
ATTACH THE 6" OR 8" SPACE SPOCK DRUM
The extra 6" or 8" (or both) will have a pre-installed metal bridge (image C).
n
These bridges take the place of the regular Yamaha lug casing.
Attach the metal bridge to the corresponding shell as shown in the
n
configuration diagram
Locate the bag of bolts, washers and nuts with the sprocket (image D)
n
Place 6" or 8" (or both) on a flat surface within the drum array configuration,
n
so you can connect them to the corresponding shell
• Insert bolts through holes in shell
• Slide the channel of the bridge down the bolt head
• Fasten the nut on the inside of the shell (image D)
NOTE: The height of the bridge is important. Image D shows the top half
of the bolt head. This is the ideal height for the bridge on both shells.
C
Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions - V0823
D
3
Advertisement
