Advertisement
Mounting Procedure
Step 1.
If your cabinet does not have a overhang :
a)
Position template in desired location on underside of cabinet, flush with front
edge.
b)
Then tape template in place and go to step 2.
If your cabinet has an overhang:
a) Measure the thickness of the overhang.
b) Fold front of the template downward along the printed guideline that is closet to
the thickness of your cabinet.
c) Tape fold-down portion to backside of overhand, tape template to cabinet
underside.
Note: If your cabinet has glue blocks or other obstructions, cut out corresponding areas
on the template to clear them. Do not cut or cut through the screw holes indicated on the
template.
CAUTION: It is recommended that safety glasses be worn while drilling screw holes to
prevent the possibility of eye injury.
Advertisement
