Related Manuals for Sylvania SCR2608
Summary of Contents for Sylvania SCR2608
- Page 1 Under Cabinet CD Clock Radio with Remote MODEL SCR2608 INSERUCTION MANUAL Operating Instructions BEFORE OPERATION THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS. Be sure to save this booklet for future reference.
-
Page 2: Important Safety Instructions
INSTRUCTIONS The Lightning flash with arrowhead symbol, with an equilateral triangle is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. -
Page 3: Safety Certification
Object and Liquid entry-Care should be taken so that objects do not fall and liquids are not spilled into the housing. Damage Requiring Service-The appliance should be serviced by qualified service personnel when: • The Power-supply cord or the plug has been damaged; or •... -
Page 4: Laser Safety
IMPORTANT INFORMATION REQUIRED BY THE FCC Since the Compact Disc (CD) circuitry may cause interference to other radios nearby, switch this set off when not in use or move it away from the affected radios. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference;... -
Page 5: Location Of Controls
1. LCD DISPLAY- A (for CD, CLOCK AND RADIO) 2. VOLUME DOWN 3. VOLUME UP 4. CD DRAWER 5. REMOTE SENSOR 6. POWER ON INDICATOR 7. POWER/ ALARM OFF BUTTON 8. CD DRAWER OPEN/CLOSE BUTTON 9. LCD DISPLAY B (FOR TIMER) 10. -
Page 6: Remote Control
1. OPEN /CLOSE KEY 2. PLAY/PAUSE KEY 3. FAST FORWARD (SKIP >>|) BUTTON 4. VOLUME UP KEY 5. VOLUME DOWN KEY 6. REWIND (SKIP |<<) BUTTON 7. RANDOM KEY 8. MUTE KEY 9. CD/ RADIO MEMORY KEY (MEM) Insert two(2) “AAA” /1.5V(not included) batteries following the polarity as indicated in the compartment to the right. - Page 7 Under Cabinet Mounting Instructions Tools Required Drill and 1/4” Drill Bit Ruler or Tape Measure Nail or Awl Scissors Screwdriver – Phillips Countersink (Optional) Masking Tape Safety Glasses...
- Page 8 1 – Mounting template Parts Packed with your unit Spacers (3pcs of 1/4” , 3pcs of 1/2”, 3pcs of 1”) Washers (3pcs) Phillips head screws (3pcs of Mounting Template Before Mounting Empty contest of the selected cabinet under which the unit will be mounted and thoroughly clean the underside of the cabinet to remove any grease residue which might be present.
- Page 9 Mounting Procedure Step 1. If your cabinet does not have a overhang: Position template in desired location on underside of cabinet, flush with front edge. Then tape template in pace and go to step 2. If your cabinet have overhang: a) Measure the thickness of the overhang.
- Page 10 Helpful Hints: On wooden cabinets you may want to mark and start the drill holes with a nail or an awl. Be sure to hold the drill very firmly against the cabinet to reduce “walking” of the drill bit from the markings. Using masking tape above the hole locations on inside of wooden cabinet shelf to help reduce splintering.
- Page 11 FULL LCD DISPLAY UNIT POWER SUPPLY ( Mains 120V/60Hz) Connect the power cable plug to the (120V) wall outlet. Warning: Before using the unit. Check that the local mains supply is compatible with the HI-FI System (120V 60Hz) Do not plug or unplug the power cable when your hands wet. When planning not to use this unit for long periods of time (i.e Vacation etc.) disconnect the plug from the wall outlet.
-
Page 12: Clock Setting
CLOCK SETTING While in the CD or Radio mode, Press “Display/AL.Set” two time to enter the time mode. Press and hold MEMORY/C- ADJ button for 2 seconds, enter to hour adjustment mode( Hour will begin to flash) Press SKIP >>| or SKIP |<< button to desired time. (e.g. 10:27pm -> 9:27am) Press MEMORY/C-ADJ button, enter to minute adjustment mode.( Minute will begin to flash) d . - Page 13 ALARM TIME SETTING 1. While in the CD or Radio mode, Press “Display/AL.Set” one time to enter the alarm time set mode. (The bell icon “ will appear and begin to flash) 2. Press and hold MEMORY/C- ADJ button for 2 seconds, enter to alarm hour adjustment mode (Alarm hour will begin to flash) 3.
-
Page 14: Sleep Function
a. Power on the unit by pressing the Power/AL. off button. b. Open the CD DRAWER and insert a CD (with the label side facing up) into the CD compartment. c. Close the CD DRAWER. d. Power off the unit by pressing the Power/AL. off button. e. -
Page 15: Listening To The Radio
TIMER FUNCTION (0:01 --------19:59) 1. Continue press the HOUR SET button (T/HOUR) adjust the hour of the time. (from 19: --to 0: --) 2. Continue press the MINUTE SET button (T/MIN) adjust the minute of the time. (from --:59 to -- : 00) 3. -
Page 16: Preset Tuning
RADIO SECTION RADIO RECEPTION NOTE: In Radio operation mode, press Display/AL.Set button to display the clock time. Press Power/AL. off button to turn on the unit. Press RADIO button to select radio. 3. Select AM/FM band by pressing the STOP/BAND button. AM and FM are alternately selected each time when the STOP/BAND button is pressed. - Page 17 OPERATION OF CD PLAYER Power ON in CD mode and indicate the total tracks which contain in the disc If open the CD DRAWER or there is no disc inside the unit , “00” display will be indicated on the display. PLAYING A CD 1.
- Page 18 Press during play. Backward------------SKIP |<< button Fast Forward------------SKIP >>| button Press SKIP |<< button twice to skip to the beginning of the previous track. Press SKIP >>| button once to skip to the beginning of the next track. SEARCHING TRACKS Press and hold during play Backward------------SKIP |<<...
-
Page 19: Troubleshooting Guide
You experience a problem with this unit check the chart below before calling of service. SYMPTOM System will ---AC Cord not connected Not turn on properly ---Disc inserted incorrectly Disc will not ---Defective compact disc Play ---CD compartment not closed ---Moisture condensation on disc Erratic CD...