Advertisement
6.
TROUBLESHOOTING
Caution: Ensure power supply is OFF when disconnecting / connecting
cables.
Problem
Cause
Product does
Incorrect power
NOT light up
connection
after installation
Shadowing
Light source covered
Modules are
Excess products
dim
connected
Flickering
Incorrect power input/
Excess products
connected
If problems persist or the product is not working as specified, please contact your nearest
authorized service center or Traxon Technologies office for assistance.
7.
WARRANTY STATEMENT
Traxon Technologies warrants its Products against material or workmanship defects from date
of purchase, provided that the purchased items are used under the conditions stated in this
user manual.
Please refer www.traxon-ecue.com for all warranty terms and conditions.
www.traxon-ecue.com
Installation Guide
Possible Solutions
•
Check Mains Power
•
Check power supply leads and wire
connections
•
Ensure output wires are connected with
proper polarity
•
Check for cables, wires or unwanted
debris covering LED light source
•
Ensure the power supplies are not
overloaded due to an excess of products
connected
•
Ensure the input voltage is correct
•
Ensure the power supplies are not
overloaded due to an excess of products
connected
©2023 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED.
07/23 V1.1
18 of 19
Advertisement
