2.3
On-Site Installation
•
DO NOT attempt installation in wet or severe weather conditions.
•
DO NOT leave and expose any Allegro Linear 2.1 AC or power sources
unconnected under wet/raining or snowing environment.
•
IP failure induced by stressed/damaged cables during or after installation
will not be under warranty by Traxon Technologies.
•
ALWAYS keep the cables protected from sharp objects and ensure no
damage is generated on the cable.
•
Failure to keep Allegro Linear 2.1 AC within the operating temperature
range of –30°C to +50°C (–22°F to +122°F) and storage temperature
range of –40°C to +70°C (–40°F to +158°F) will void the product's
warranty.
1.
Do not leave and expose Allegro Linear 2.1 AC without Dust Cap plugged under wet/
raining or snowing environment as the Allegro Linear 2.1 AC is not IP66 compliant unless
properly connected. Make sure there is a minimum spacing of 5mm/0.2" between Allegro
Linear 2.1 AC for thermal expansion.
FIG.8:
Min. clearance between fixtures
www.traxon-ecue.com
Installation Guide
Min.5mm/0.2"
©2023 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED.
07/23 V1.1
10 of 19