Page 1
Aufbauanleitung / assembly instructions mod. 3527 - 3528 PUH Doppel-Auszug Bitte diese Aufbauanleitung sorgfältig aufbewahren! Please keep this assembly instructions safe! 4,5 x 30 M10 x 20 Oberbau Unterbau 1.Montagematerial. 1. Fitting material. 4,5 x 30 2. Den Oberbau umgedreht auf gepolsterten Montageböcken ablegen.
Page 2
4. Die Füße der Festseite (schwarze Stellschrauben) an der kürzeren Stahl-Platte mit den Muttern fixieren. 4. Fix the legs of the fixed side (black adjustable screws) with the nuts to the shorter metal-plate. 2 / 7 3527 - 3528 PUH Doppel-Auszug Änderungsdatum: 04.07.23...
Page 3
Die Rollen müssen mit der schwarzen Nocken fluchten! 5. Screw on both steel-boards of the pre-assembled table bases to the table top again. The rolls have to be in line with the black cams. 3 / 7 3527 - 3528 PUH Doppel-Auszug Änderungsdatum: 04.07.23...
Page 4
8. Before the extension can be pulled out, the two black levers must be released. The levers are in the released position, if they are folded to the center of the table. 4 / 7 3527 - 3528 PUH Doppel-Auszug Änderungsdatum: 04.07.23...
Page 5
For this purpose do the 10. … loosen the socket screw. Adjust the same steps as under No. 9 described. extenson-rod by turning the inner socket screw. Then tighten both outer socket screws again. 5 / 7 3527 - 3528 PUH Doppel-Auszug Änderungsdatum: 04.07.23...
13c. Swing out the table-extension by using the 13c: Die Klappeinlage mit dem Ledergriff aus- leather belt. Check the hight again; if klappen, die Höhe rechts erneut kontrollie- necessary adjust again. ren und wenn nötig erneut einstellen. 6 / 7 3527 - 3528 PUH Doppel-Auszug Änderungsdatum: 04.07.23...
Höhe kontrollieren. Ggf. erneut justieren. 14c. Swing in both pieces of the table-extension at once. Use the leather-belt to swing out the table- extension and check the hight again. If necessary, adjust again. 7 / 7 3527 - 3528 PUH Doppel-Auszug Änderungsdatum: 04.07.23...