Swann SW242-SR4 User Manual page 8

"SEQ" / " ＋ " :
Press "SEQ" button to activate the call monitor function and press "SEQ" button
again to escape the call monitor mode.
Press "＋ " button to change the setting in the menu.
"POWER" :
Press this button to turn on / off the DVR.
(Under recording mode, please stop record before turn off the DVR).
"CH1 " "CH2 " "CH3 " "CH4 " :
Press "1 " "2 " "3 " "4 " buttons to select the channel to display.
"REC" :
Press "REC" button to activate the manual recording.
"PLAY" :
Press "PLAY" button to playback the recorded files.
"
UP / PAUSE , DOWN / STOP, LEFT / FAST REWIND, RIGHT / FAST FORWARD
◄►
Press "▲▼ " to move the cursor up / down / left / right.
Under playback mode, press "
Under playback mode, press "
Under playback mode, press "
Under playback mode, press "
" " :
Press these two buttons to select live or playback sounds of the 2 audio channels.
" " :
Press these two buttons at the same time to enter / exit the PTZ control mode.
Press "POWER" button on the DVR front panel to shutdown, and then press
"POWER" + "►" to switch to PAL system.
(Press the buttons until the monitor show the video image of the DVR.)
Press "POWER" button on the DVR front panel to shutdown, and then press
"POWER" + "◄" to switch to NTSC system.
(Press the buttons until the monitor show the video image of the DVR.)
Press "MENU" + "ENTER" buttons on the DVR front panel to key lock.
" button to pause playback.
" button to stop playback.
" button to fast rewind.
" button to fast forward.
5
" :