Ap Advanced Setting; Network - Swann SW242-SR4 User Manual

3) 3)

AP Advanced Setting:

AP Advanced Setting
Press "System Config

Network

Network
The network configuration allows DVR
to connect to an Ethernet network or
dial-up.
Static IP:
Static IP:
Enter the "server IP", "gateway",
"net mask" and "web port", then
press "APPLY" to confirm.
PPPoE :
PPPoE :
Enter the "username" and
"password" provided by your ISP
(Internet Sever ) supplier, then
press "APPLY" to confirm.
DHCP:
DHCP:
This DHCP function need to be
supported by router or cable
modem network with DHCP
service. Choose the DHCP IP type
and press "APPLY" to confirm.
***Note***:
***Note***:
PPPoE and DHCP network
connection type will require to
apply DDNS service to get a
DDNS service
" Hostname" to correspond to Hostname
dynamic IP address.
Please refer to P.33 for details.
***Note***:
***Note***:
Some router brand may need to
restart the DVR to get the IP
address.
Web Port:
Web Port:
The DVR can be viewed over the
network with software AP or a web
browser. Typically the TCP port
used by HTTP is 80. However in
some cases it is better to change
this port number for added
flexibility or security. Valid number
is 80 ~ 19999.
" button to enter the system setting page.
4CH DVR
4CH DVR
4CH DVR
32