Mitsubishi Electric MXZ-SM36NAM2 Technical & Service Manual page 173

Setting and display
Main menu
items
Initial Display Main display
setting setting
Display de-
tails
Contrast •
Brightness
Language
selection
Operation Auto mode
setting
Setback
mode
Maintenance Error information
Filter information
Cleaning Auto
descending
panel
Service Test run
Input maintenance
Settings Function set-
ting
Check Error history
Diagnosis
Smooth main-
tenance *
Request code
*
1
Others Maintenance
password
Initialize re-
mote control-
ler
Remote con-
troller infor-
mation
*
1
This function is available only when certain outdoor units are connected.
OCH810A
Use to switch between "Full" and "Basic" modes for the Main display, and use
to change the background colors of the display to black.
Make the settings for the remote controller related items as necessary.
Clock: The initial settings are "Yes" and "24h" format.
Temperature: Set either Celsius (°C) or Fahrenheit (°F).
Room temp.: Set Show or Hide.
Auto mode: Set Auto mode display or Only Auto display.
Use to adjust screen contrast and brightness.
Use to select the desired language.
Whether or not to use Auto mode can be selected by using the button.
This setting is valid only when indoor units with Auto mode function are
connected.
Whether or not to use the Setback mode can be selected by using the button.
This setting is valid only when indoor units with the Setback mode function are
connected.
Use to check error information when an error occurs.
• Check code, error source, refrigerant address, model name, manufacturing number,
contact information (dealer's phone number) can be displayed.
(The model name, manufacturing number, and contact information need to be
registered in advance to be displayed.)
Use to check the filter status.
• The filter sign can be reset.
Use to lift and lower the auto descending panel (Optional parts).
Select "Test run" from the Service menu to bring up the Test run menu.
• Test run • Drain pump test run
Select "Input maintenance Info." from the Service menu to bring up the
Maintenance information screen.
The following settings can be made from the Maintenance Information screen.
• Model name input • Serial No. input • Dealer information input • Initialize
maintenance info.
Make the settings for the indoor unit functions via the remote controller as
necessary.
Display the error history and execute "delete error history".
Self check: Error history of each unit can be checked via the remote controller.
Remote controller check: When the remote controller does not work properly, use
the remote controller checking function to troubleshoot the problem.
Use to display the maintenance data of indoor/outdoor units.
1
Use to check operation data such as thermistor temperature and error
information.
Use to change the maintenance password.
Use to initialize the remote controller to the factory shipment status.
Use to display the remote controller model name, software version, and serial
number.
173
Setting details