Suunto Vyper User Manual page 46

Dive computer
Hide thumbs Also See for Vyper:
Table of Contents

Advertisement

Page II (Fig. 4.8)
dive number in the dive series
maximum depth
(NOTE! Due to lower resolution, the reading may differ from the maxi-
mum depth reading of the Dive History up to 0.3 m [1 ft].)
total dive time
temperature at the maximum depth
Altitude Adjustment setting (not displayed in GAUGE Mode)
Personal Adjustment setting (not displayed in GAUGE Mode)
SLOW label if the diver has violated the maximum ascent rate
STOP label if the Mandatory Safety Stop was violated
the ASC TIME label, if the dive becomes a decompression dive
dive attention symbol, if the dive was started while symbol was dis-
played
downward pointing arrow, if the ceiling was violated
oxygen percentage (only in NITROX Mode)
maximum OLF during the dive (only in NITROX Mode).
Page III (Fig. 4.9)
dive number in the dive series
average depth
surface interval time before the dive.
Page IV (Fig. 4.10)
dive number in the dive series
the profi le of the dive; automatic scrolling during which:
blinking logbook symbol, when the user has pressed the PLAN button
for Bookmark
blinking SLOW label when registered
blinking ASC TIME label when the dive became a decompression dive.
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents