Heart Rate Signal Troubleshooting - Suunto T4 User Manual

Suunto t4: user guide

Hide thumbs Also See for T4:

Table of Contents

After switching to Training mode,

Suunto t4 displays "HR" while it is seeking

the HR belt signal.

Once the device has found the signals, your heart rate or speed and distance information will be

displayed in the center of the screen.

NOTE

3.2. Heart rate signal troubleshooting

If you can't see a heart rate signal, make sure you've paired the heart rate transmitter belt, see

Section 2.5.5. Pair a POD settings.

If you lose the signal, try the following steps to fix the problem.

•

Exit and then re-enter Training mode.

•

Make sure that you are wearing the heart rate transmitter belt correctly. (See Section 3.1.

Putting on the heart rate transmitter belt)

•

Ensure that the electrode area on the back of the belt is slightly wet.

For detailed instructions on how to pair and calibrate your optional speed

and distance POD, please refer to the POD's own user's guide.

Instead of your heart rate, "HR" is

shown in the center of the display if no

heart rate belt is found.

Table of Contents