Weber GENESIS II Assembly Manual page 61

LIGHTED CONTROL KNOBS
SYMPTOM
• Control knobs do not turn on after pressing power button.
CAUSE
Batteries are old.
Replacing Batteries for the Lighted Control Knobs
Use alkaline batteries only. Do not mix old and new batteries or different types of batteries (standard, alkaline, or
rechargeable). If you do not plan to use the light for a month or more, remove the batteries.
1) Locate the battery housing on the inside of the cabinet on the bottom right side.
2) Turn battery housing counterclockwise to open (A).
3) Replace three D batteries (B).
SOLUTION
Install new batteries. Refer to "Replacing Batteries
for the Lighted Control Knobs" on this page.
21