Starting And Operating; New Vehicle Break-In; Adjustable Throttle And Brake; Pedal - GMC Sierra Limited 1500 2019 Owner's Manual

Table of Contents

Advertisement

250
Driving and Operating
gross axle weight ratings
(GAWR). The total axle loads
should not exceed the vehicle's
gross vehicle weight rating
(GVWR). These ratings are
given on the Certification/
Tire label attached to the
B-pillar. See Certification/Tire
Label under Vehicle Load
Limits 0 242. If weight ratings
are exceeded, move or remove
items to bring all weights below
the ratings.
See your dealer for more
information on curb weights,
cargo weights, Cargo Weight
Rating, and the correct center of
gravity zone.
Starting and
Operating

New Vehicle Break-In

Caution
The vehicle does not need an
elaborate break-in. But it will
perform better in the long run if
you follow these guidelines:
Keep the vehicle speed at
88 km/h (55 mph) or less for
the first 805 km (500 mi).
Do not drive at any one
constant speed, fast or slow,
for the first 805 km (500 mi).
Do not make full-throttle
starts. Avoid downshifting to
brake or slow the vehicle.
Avoid making hard stops for
the first 322 km (200 mi) or
so. During this time the new
brake linings are not yet
broken in. Hard stops with
new linings can mean
(Continued)
Caution (Continued)
premature wear and earlier
replacement. Follow this
breaking-in guideline every
time you get new brake
linings.
Do not tow a trailer during
break-in. See Trailer Towing
0 303 for the trailer towing
capabilities of the vehicle
and more information.
Following break-in, engine speed
and load can be gradually
increased.
Adjustable Throttle and
Brake Pedal
If equipped, the position of the
throttle and brake pedals can be
changed.
The pedals can only be adjusted
when the vehicle is in P (Park).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sierra 2500 2019Sierra 3500 2019Sierra denali 2500 2019Sierra denali 3500 2019

Table of Contents