Reset Button; Power Button - Supermicro X7DBR-8 User Manual

Reset Button

The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to the
hardware reset switch on the computer
case. Refer to the table on the right for
pin defi nitions.

Power Button

The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off
the system. This button can also be
confi gured to function as a suspend but-
ton (with a setting in BIOS - see Chapter
4). To turn off the power when set to
suspend mode, press the button for at
least 4 seconds. Refer to the table on
the right for pin defi nitions.
A. Reset Button
B. PWR Button
GLAN1
PCI-X 100MHz ZCR
SXB-
PCI-X 100MHz
GLAN2
SCSI
CTRLR
PWR
4-pin
8-pin PWR
SMB
JPWF PWR
SXB-
SXB-
JOH1
2-13
Chapter 2: Installation
Reset Button
Pin Defi nitions (JF1)
Pin# Defi nition
3 Reset
4 Ground
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 Signal
2 +3V Standby
20 19
Ground
X
Power LED
HDD LED
NIC1 LED
NIC2 LED
OH/Fan Fail LED
PWR Fail LED
Ground
Ground
2 1
NMI
X
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
Reset
Reset Button
A
Power Button
PWR
B