Toro 72923 Operator's Manual page 83

Figure 131
Rear-Discharge Machines
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ensure that the belt-guide
tab hits against the pivot
hub.
7. Remove and retain the hardware on both sides
of the deck as shown in
g024146
5. Belt guide
6. Spring-loaded idler pulley
7. Square hole in the idler
arm for the ratchet
8. Spring
Figure 132.
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
8. Raise the deck struts and secure them in the
raised position.
9. Slide the deck out to the right side of the
machine.
83
Figure 132
g010252