Toro 72923 Operator's Manual page 47

Changing the Engine Oil
Note:
Dispose of the used oil at a recycling center.
1. Start the engine and let it run for 5 minutes.
Note:
This warms the oil so that it drains better.
2. Park the machine so that the drain side is slightly
lower than the opposite side to ensure that the
oil drains completely.
3. Disengage the blade-control switch (PTO) and
engage the parking brake.
Figure 55
4. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
5. Drain the oil from the engine
g008804
g194611
47
(Figure 56).
Figure 56
g008804
g027734