Table of Contents
Advertisement
AC 97/AUX In/CD In
AC'97 provides high quality onboard
audio. The X6DAL-G/X6DAL-TG fea-
tures 6-channel sound for front L&R,
rear L&R, center and subwoofer
speakers.
This feature is activated
with the Advanced software (on the
CD-ROM included with your mother-
board). Sound is then output through
the Line In, Line Out and MIC jacks
(see at right).
Activate AC 97 with
the "AC 97 Audio" setting in the Ad-
vanced Chipset Features section of
BIOS. In addition, there are also Aux
In and CD In Connectors on the moth-
erboard.
Speaker/Power LED/
Keylock
On the JF2 header, pins 1/3/5/7
are for the Speaker, and Pins 2/4/
6 are for the Power LED and pins
8/9 are for Keylock. See the table
on the right for speaker pin defini-
tions. Note: The speaker connec-
tor pins are for use with an exter-
nal speaker.
If you wish to use
the onboard speaker, you should
close pins 5-7 with a jumper.
Lin In/Line Out
Mic
CD In
Aux In
PWR LED/Speaker
2-19
Chapter 2: Installation
Line In (surround L/R)
Blue:
Green: Line Out (Front L/R)
Pink: MIC In (Center/
subwoofer)
Speaker Connector Pin
Definitions (JF2)
Pin
Number
Function
1
+
Red wire, Speaker data
3
Key
No connection
5
7
Speaker data
Definition
Key
Advertisement
Table of Contents
