Supermicro X6DAL-G User Manual page 11

Quick Reference ( X6DAL-G/X6DAL-TG)
Jumper Description
CN1 Alarm Reset
J13 SMB Data to PCI Enable
J15 SMB Clock to PCI Enable
J26 Audio Enable
JBT1 Clear CMOS
JPL1 LAN1 Enable
JPS1 Marvell's SATA Enable (*X6DAL-TG)Pins 1-2 (Enabled)
JWD Watch Dog Enable
Connector
ATX PWR
PWR2/PWR 3
COM1(J4)/COM2 (J5)
DS7, DS8
FAN #1-#6
DIMM#1A-#3B
LAN 1
IDE1, IDE2
J2
J6
J7
J24
J27
J35
J41
J50
J61
JF1
JF2
JL1
JSLED
Parallel
PCI-4, PCI-5
PCI-X2, PCI-X3
PCI-E1, PCI-E6
H-SATA 0/1 (JS0/JS1) Hance Rapids-Serial ATA Ports 0/1
SATA0-3(J52-J55)
WOL(JWOL)
WOR (JWOR)
USB 0/1
USB 2/3 (J42)
Primary 24-pin ATX PWR Connector
12V 8-pin CPU PWR/12V 4-pin PWR Connectors
COM1/COM2 Serial Port Connectors
POST Code LED (*See Appendix A)
CPU/Chassis Fans Headers
Memory (DIMM) Slots#(1A,1B, 2A,2B, 3A,3B)
G-bit Ethernet Port
IDE1/2 Hard Disk Drive Connectors
Keyboard/Mouse
Down: Line_in, Up: Line_out
Power Fault Header
Floppy Disk Drive Connector
Power System Management
SATA SMB (I 2 C) Header (*X6DAL-TG Only)
Aux. In
CD in
Microphone
Front Panel Control (* See Chapter 2)
Speaker, PWR LED, Keylock (*See Chapter 2)
Chassis Intrusion Header
SATA LED Header
Parallel (Printer) Port
PCI 32-bit slots
PCI-X 64-bit 66MHz
PCI-Express x8/x16 @4GB/s slots
Marvel-Serial ATA Ports 0/1/2/3 (*X6DAL-TG Only)
Wake-on-LAN
Wake-on-Ring Header
Back Panel Universal Serial Bus Ports
Front Panel Universal Serial Bus Ports
1-5
Chapter 1: Introduction
Default Setting
Open (Disabled)
Closed (Enabled)
Closed (Enabled)
Closed (Enabled)
See Chapter 2
Pins 1-2 (Enabled)
Pins 2-3 (NMI)
Description