"Remove the LCD module" on page 66
"Remove the LCD bezel" on page 68
"Remove the LCD panel" on page 69
Step 1.
Disconnect the EDP cable from the camera board and then remove the EDP cable.
Figure 74. Disconnect the EDP cable from the camera board and then remove the EDP cable
Go to
https://support.lenovo.com/partslookup
replacement parts:
EDP cable
Removable tape
Remove the camera
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 66
"Remove the LCD bezel" on page 68
"Remove the LCD panel" on page 69
"Remove the camera rubbers" on page 70
Step 1.
Disconnect the EDP cable from the camera board and then remove the camera.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
71