Figure 60. Remove two screws and then open the hinge
Screw specifications
M2.5 x L5
Step 3.
Disconnect the I/O board cable from the system board. Remove two screws and then remove the I/
O board with cable.
Figure 61. Remove two screws and remove the I/O board with cable
Screw specifications
M2 x L2.8
Step 4.
Separate the I/O board cable from the I/O board.
Number of screws
2
Number of screws
2
.
Chapter 4
Removing a FRU or CRU
63