LG GR-P288STJ Owner's Manual page 17

Installation
Handle removal
To move the refrigerator through a house door, it may be necessary to remove the
refrigerator door handles.
•
Loosen the set screws with a 2.5 mm (3/32")
Allen wrench and remove the handle.
•
Handle
reinstallation
Place the handle on the door by aligning handle footprints to fit mounting fasteners and
tighten the set screws with a 2.5 mm (3/32") Allen wrench.
•
17
NOTE
Handle appearance may vary from illustrations on this page.
Set Screw
Allen Wrench
NOTE
If the handle mounting fasteners need to be tightened or removed, use a 1/4" Allen
wrench.
Mounting
Fasteners
NOTE
If the handle mounting fasteners need to be tightened or removed use a 1/4" Allen
wrench.
Mounting
Fasteners