Table of Contents
Advertisement
5.
Place the SATA/SAS storage device
into the tray then secure it with four
screws.
6.
Insert the drive tray and storage device
assembly all the way into the depth of
the bay until just a small fraction of the
tray edge protrudes.
When installed, the SATA/SAS connector on the drive connects to the SATA/SAS interface
on the backplane.
7.
Push the tray lever until it clicks and
secures the drive tray in place.
The drive tray is correctly placed
when its front edge aligns with the
bay edge.
8.
Repeat steps 1 to 7 to install the other
SATA/SAS storage devices.
2-10
Chapter 2: Hardware Information
Advertisement
Table of Contents
