Table of Contents
Advertisement
S
UPERSERVER 6014V-M4 User's Manual
Serial Ports
The COM1 serial port is located be-
side the mouse port. COM2 is a head-
er on the serverboard located near the
printer connector (see serverboard
layout for location). See the table on
the right for pin defi nitions.
Power Fail Header
Connect a cable from your power sup-
ply to the Power Fail header to provide
you with warning of a power supply
failure. The warning signal is passed
through the PWR_LED pin to indicate
a power failure. See the table on the
right for pin defi nitions.
Fan Headers
The X6DVA-4G has six fan headers,
designated FAN1 through FAN6. Fan
speed is controlled via Thermal Man-
agement with a BIOS setting. See the
table on the right for pin defi nitions.
JLAN1/2 (Ethernet Ports)
Two Gb Ethernet ports (designated
JLAN1 and JLAN2) are located be-
side the VGA port on the I/O back-
plane. These ports accept RJ45 type
cables.
Serial Port Pin Defi nitions
Pin #
Defi nition
1
CD
2
RD
3
TD
4
DTR
5
Ground
Note: Pin 10 is included on the header but not on
the port. NC indicates no connection.
Power Fail Header
Pin Defi nitions (PW4)
Pin#
1
2
3
4
Note: This feature is only available when using
redundant Supermicro power supplies.
Fan Header
Pin Defi nitions
Pin#
1
2
3
5-14
(J4/J5)
Pin #
Defi nition
6
DSR
7
RTS
8
CTS
9
RI
10
NC
Defi nition
P/S 1 Fail Signal
P/S 2 Fail Signal
P/S 3 Fail Signal
Reset (from MB)
(FAN1-6)
Defi nition
Ground (Black)
+12V (Red)
Tachometer
Advertisement
Table of Contents
