Table of Contents
Advertisement
3-4
Installing the PCI Expansion Card
• Voltages can be present within the server whenever an AC power source is connected. This
voltage is present even when the main power switch is in the off position. Ensure that the
system is powered-down and all power sources have been disconnected from the server prior to
installing a PCIe card.
• Failure to observe these warnings could result in personal injury or damage to equipment.
Follow these instructions to install the PCI Expansion card:
1.
Use a screw driver to push the slot cover.
2.
Remove the slot cover from the PCIe bracket.
3.
Align the PCIe card onto the slot and push in the direction of the arrow until the PCIe card sits in the
PCIe card connector.
4.
Secure the PCIe card with the screw.
5.
Reverse the previous steps to remove the PCIe card.
2
1
System Hardware Installation
- 27 -
5
3
4
5
Advertisement
Table of Contents
