Installing The Memory - Gigabyte W773-W80 User Manual

3-3-2 Installing the Memory

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR5 DIMMs on this motherboard.
Follow these instructions to install the Memory:
1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
2
Type
RDIMM
RDIMM 3DS
Warning:
To avoid any potential short circuit of the DIMM slots, please remove any stand-offs
from the chassis that will be located underneath the DIMM slots, before installing
the motherboard into the chassis.
DIMM
Ranks Per DIMM
Capacity
and Data Width
(GB)
16Gb
SRx8 (RC D) 16GB
SRx4 (RC C) 32GB
SRx4 (RC F) 9x4 32GB
DRx8 (RC E) 32GB
DRx4 (RC A) 64GB
DRx4 (RC B) 9x4 64GB
(4R/8R)x4 2H-128GB
(RC A) 4H-256GB
*1DPC applies to 1SPC or 2SPC implementations (SPC - Sockets Per Channel)
System Hardware Installation
1
Speed (MT/s); Voltage (V);
DIMM per Channel (DPC)
1DPC*
1.1V
4800
- 26 -
2