Table of Contents
Advertisement
1.
Clip the two ceiling brackets onto a ceiling
crossbar.
Figure 6: Attaching the Mounting Plate
2.
Use the included screws to secure the
mounting plate to the ceiling brackets.
3.
Plug the Ethernet cable into the LAN
(PoE) port of the device. Note: If you are
powering the device with a power adapter,
plug the adapter into the Power Input port.
Figure 7: Mounting the Device
4.
Rotate the DAP-X2810 into the grooves
on the mounting plate to secure it to
the plate.
4
FCC:
Operations in the 5.15-5.25GHz band are
restricted to indoor usage only.
Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum
distance 23.9 cm between the radiator &
your body.
NCC警語:
取得審驗證明之低功率射頻器材，非經核准，公
司、商號或使用者均不得擅自變更頻率、加大功
率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾
合法通信；經發現有干擾現象時，應立即停用，
並改善至無干擾時方得繼續使用。前述合法通
信，指依電信管理法規定作業之無線電通信。低
功率射頻器材須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
使用此產品時應避免影響附近雷達系統之操作。
DAP-X2810 Quick Installation Guide
Advertisement
Table of Contents
