Asus Z9PE-D8 WS Manual page 89

Memory Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Compatibility RID
Memory Configuration
Total Memory
Current Memory Mode
Currently Memory Speed
Mirroring
Sparing
Memory Mode
Numa
DDR Speed
Channel Interleaving
Rank Interleaving
Patrol Scrub
Demand Scrub
Data Scrambling
Device Tagging
Thermal Throttling
Enable High Temp.
Allow 2x Refresh
Altitude
Memory HOT sensor support
DIMM Information
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Compatibility RID [Enabled]
Supports compatibility revision ID (CRID) functionality mentioned in Sandybridge
BIOS spec.
Configuration options: [Enabled] [Disabled]
Memory Mode [Independent]
Select the mode for memory initializaton.
Configuration options: [Independent]
Numa [Enalbled]
Allows you to disable or enable Non Uniform Memory Access.
Configuration options: [Enabled] [Disabled]
DDR Speed [Auto]
This item allows you to configure force DDR speed.
Configuration options: [Auto] [Force DDR3 800] [Force DDR3 1066] [Force
DDR3 1333] [Force DDR3 1600] [Force DDR3 1866] [Force DDR3 2133] [Force
DDR3 2400] [Force DDR3 2666]
Channel Interleaving [Auto]
Select different channel interleaving setting.
Configuration options: [Auto] [1 Way] [2 Way] [3 Way] [4 Way]
ASUS Z9PE-D8 WS
Advanced
[Enabled]
16384 MB (DDR3)
Independent
1333 MHz
Not Possible
Not Possible
[Independent]
[Enabled]
[Auto]
[Auto]
[Auto]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[CLTT]
[Disabled]
[Enabled]
[300 M]
[Enabled]
Support for Compatibility
Revision ID(CRID)
Functionality mentioned in
Sandybridge bios spec
→←: Select Screen
Select Item
↑↓:
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
4-21