Dispensing Beverages; Doubleshot And Tripleshot; Dispensing A Coffee Beverage With Milk - Siemens CT918L1D0 Instructions For Use Manual

en operation
When the appliance switches on,
the display shows the logo. When
the appliance is switched on or off,
it will rinse itself automatically.
When switched off, the appliance
will emit steam into the drip tray for
cleaning. The appliance will not
rinse itself if the appliance is still
warm when switched on or if no
beverage was dispensed before it
was switched off.
8.2 Dispensing beverages
Find out how to prepare a drink of
your choice.
WARNING
Risk of scalding!
Freshly prepared drinks are very hot.
▶
Leave drinks to cool down if ne-
cessary.
▶
Do not let escaping liquids or
steam come into contact with your
skin.
Notes
With a number of settings your cof-
¡
fee is prepared in several steps.
Wait until the process is fully com-
pleted.
If you are dispensing a beverage
¡
with milk, always connect a con-
tainer filled with milk to the milk
hose and suction pipe.
The milk container is specially de-
¡
signed for this appliance. Only use
the milk container for storing milk
in the refrigerator and in the
house.
If the milk system has not been
¡
cleaned, small amounts of milk
may escape when hot water is dis-
pensed.
8.3 doubleShot and tripleShot
Your appliance grinds the coffee two
or three times.
54
To ensure that only pleasant-tasting
and easily digestible aromatic sub-
stances are released, coffee beans
are freshly ground and brewed again
by the appliance.
The longer coffee brews, the more
bitter substances and undesirable
aromas are released. These bitter
substances and undesirable aromas
affect the taste and digestibility of
coffee.
Note: The functions "doubleShot" and
"tripleShot" depend on the beverage
strength and beverage size selected.
8.4 Dispensing a coffee
beverage with milk
An example explains how to make a
latte macchiato.
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
▶
Never touch the milk system when
it is hot.
▶
Allow the hot milk system to cool
down before touching it.
Requirements
The milk container is inserted.
¡
The milk system is connected to
¡
the beverage dispenser.
The milk container has been filled
¡
with sufficient milk.
Place a glass underneath the
1.
beverage outlet.
Press "Classic".
2.
Select and press the beverage
3.
symbol for latte macchiato.
Set the beverage parameters.
4.
To change the strength, press ⁠ .
‒
To change the per-cup quantity,
‒
press ⁠ .
To change the milk ratio, press
‒
⁠ .