Table of Contents
Advertisement
Operations
Control panel
01
01
01 Cycle Selector
02 Display
03 Temp.
04 Rinse
05 Spin
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the rinse count for the current cycle. You can set
the rinse count to a max of 5, depending on the cycle.
Press to change the spinning speed for the current cycle.
• Rinse Hold
: The final rinse process is suspended so that
the laundry remains in the water. To unload the laundry, run a
drain or spin process.
• No Spin
: The drum does not rotate after the final drain
process.
• Spin Only
: To run the Spin Only cycle, press Spin for 3
seconds. When the cycle time and spinning speed appear, press
Spin repeatedly until a desired spinning speed is selected. Then,
press Start/Pause to start the cycle. The spinning time depends
on the selected cycle.
02
03
04
05
02
03
04
05
10
08
11
09
07
06
10
08
11
09
07
06
English 33
Advertisement
Table of Contents
