If A Notice Page Is Printed - Sharp FO-2080 Operation Manual

3 TROUBLESHOOTING

If a Notice Page is printed

If you find that a notice page has been printed at the end of a print job, the print data received from the computer has not been
printed as specified.
If the following Notice Page is printed, disable the ROPM function by removing the checkmark from "ROPM" in the "Configuration"
tab of the printer driver setup screen. If you wish to use the ROPM function, set the print quality to "Draft".
The IMC memory is used to store print data when the ROPM function is used. This memory is also used to store original image data
Note
in copy mode. The percentage of IMC memory allocated to the printer function can be adjusted on the "MEM. FOR PRINTER"
setting in the user programs (see "USER PROGRAMS" in the Operation Manual).
CO NT E N TS
****************************************************
Notice Page
****************************************************
The IMC memory full error had occurred,
a normal output was not able to be executed.
Please refer to the operation manual for
the solution method.
I N D E X
35