Hardware And Software Requirements - Sharp FO-2080 Operation Manual

BEFORE INSTALLATION

Hardware and software requirements

Check the following hardware and software requirements in order to install the
software.
Computer type
3
Operating system*
Display
Hard disk free space 150 MB or more
Other hardware
requirements
1
* The machine's USB connector will transfer data at the speed specified by the USB 2.0
(Hi-Speed) only if the Microsoft USB 2.0 driver is installed in the computer.
2
* Compatible with Windows 2000 Professional, Windows XP or Windows Vista
preinstalled model standardly equipped with a USB port.
3
* Printing is not available in MS-DOS mode.
4
* The machine does not support printing from a Macintosh environment.
5
* Administrator's rights are required to install the software using the installer.
Installation environment and usable software
The following table shows the drivers and software that can be installed for each
version of Windows and interface connection method.
Cable Operating system
USB Windows 2000/XP/Vista
LAN Windows 2000/XP/Vista
* The printer driver that is installed will vary depending on the type of connection
between the machine and your computer.
IBM PC/AT or compatible computer equipped with a
1 2
USB2.0* /1.1* or 10Base-T LAN interface
4
Windows 2000 Professional*
*
1024 x 768 dots resolution and 16-bit color or higher is
recommended.
An environment on which any of the operating systems
listed above can fully operate
Printer
driver
Available*
5
, Windows XP*
Scanner Button
driver Manager
Available
Not Available
5 5
, Windows Vista*
Sharpdesk
5
41