Use - Imetec BELLISSIMA S3001 Instructions For Use Manual

• While straightening, be careful not to near the plates too much to
the sensitive parts of the face, ears, neck or head.
• Leave the plates to cool down completely when finished, before
putting the appliance away.
EN
ON / OFF
NOTE: Always keep the heating plates clean to ensure that
the straightener offers the best performance.
1. Connect the cable (6) to the power supply.
2. Switch the appliance on by pressing the ON/OFF button (5).
3. Select one of the 4 temperature values (170°C - 185°C - 210°C
- 230°C) by pressing the + or - button (4).
NOTE: The straightener features an electronic temperature
regulation system. This means that the temperature of the
straightener can be adjusted to suit the hair type:
170°C: recommended for fine hair
185°C: recommended for medium hair
210 - 230°C: recommended for thick hair
In case of doubts, always begin with the lowest temperature,
increasing it gradually until you find the ideal temperature.
4. The appliance is ready for use when the temperature shown on the
LED display (3) stops flashing.
5. After selecting the required temperature, the key lock can
be activated by pressing the + and – buttons simultaneously
for about 1 second (4A, 4B). When the key lock has been
activated, the set temperature flashes quickly on the LED screen
(3) for about 3 seconds. This avoids any risk of accidentally
changing the temperature while using the straightener.
The key lock is deactivated by following the same indications as for
its activation.
WARNING! This appliance is not to be
used if it has been dropped or if there
are visible signs of damage.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.

USE

14